5 Software Conversion
5.1.3
Variants of the TIA Portal
When installing the TIA Portal please note the following variants:
Table 5-2
STEP 7 Basic
STEP 7 Professional
Table 5-3
WinCC Basic
WinCC Comfort
WinCC Advanced
WinCC Professional
Table 5-4
STEP 7 Safety Basic
STEP 7 Safety Advanced
5.1.4
Prerequisites licensing
For the migration of the STEP 7 V5.x project (only the STEP 7 part) it is necessary
that the software is installed and also licensed:
STEP 7 V5.4 SP5 or higher + STEP 7 V13SP1 (possible as combo license)
If the project is also to be included in a WinCC flexible part, licenses are also
necessary:
WinCC flexible 2008 SP2 or higher + WinCC V13 SP1 (possible as combo
license)
Each other option that is subject to license, which is part of the STEP 7 V5.x
project, also has be licensed.
Note
The TIA selection tool supports you with the migration of licenses and suggests
the most economical variants:
http://www.siemens.en/tia-selection-tool
Migration S7-300/S7-400 nach S7-1500
Entry ID: 109478811,
V1.1,
STEP 7
WinCC
STEP 7 Safety
05/2017
Devices used
S7-1200
S7-300, S7-400, S7-1200, S7-1500, WinAC RTX,
Open Controller
Devices used
Basic Panels
Comfort Panels, Mobile Panels
PC single station
SCADA
Devices used
S7-1200
S7-300, S7-400, S7-1500, WinAC RTX
42