Activating Licensed Functions; Licensing - Siemens SINAMICS G120 Operating Instructions Manual

Appendix
A.2 Activating licensed functions
A.2

Activating licensed functions

A.2.1

Licensing

Purchasing a memory card with license
Procedure
1. Order a memory card - with or without firmware – with the license that you require.
2. Switch off the inverter power supply.
3. Insert the card into the inverter.
4. Switch on the power supply for the inverter.
You have activated the licensed function.
❒
Purchasing a license and loading to a memory card
Precondition
You have a memory card without a license.
Procedure
1. Order the license for the function that you require.
2. You receive the "Certificate of License", it contains:
– the software order number
– the license number
– the delivery note number
3. Create the license key using the "WEB License Manager".
4. Insert the card into the inverter.
5. Write the license key to the card using STARTER or BOP-2.
6. Switch off the inverter power supply.
7. Switch on the inverter power supply again.
You have activated the licensed function.
❒
492
Memory cards (Page 362)
License key (Page 493)
Writing the license key to the card (Page 496)
Converter with the CU250S-2 Control Units
Operating Instructions, 04/2018, FW V4.7 SP10, A5E31759476B AG