149235-1CD
8.5
Parameters according to Status I/O
These parameters set the parity check or I/O setting for user input/output signals.
S2C187: USER OUTPUT RELAY WHEN CONTROL POWER IS
ON
This parameter specifies the state of the user output relays when the control power is turned ON. Since
the power OFF state, including peripheral devices, cannot be completely reproduced, take note when
restarting.
0:
Reset to the power OFF state
1:
Initialized (all user relays OFF)
8.5 Parameters according to Status I/O
8-34
8 Parameter
323 of 493
RE-CSO-A031