YASKAWA NX100 Operator's Manual page 199

149235-1CD
Operation
1 In the JOB CONTENT
window, move the cursor to
the job name or condition
file for which the window is
to be displayed.
Press the direct open key
2
Direct
.
open
• The direct open function cannot be used again while a directly opened window is shown.
NOTE
• If another window is selected while the direct open function is effective, the function is
automatically cancelled and the lamp on the direct open key goes out.
• Once another JOB CONTENT window is opened by the direct open function, the source
job cannot be continuously operated. (Stopped until the opened JOB CONTENT window
is closed.)
This key lamp lights and the JOB CONTENT window or the
condition file window appears. When the direct open key
pressed once more, the key lamp turns OFF, and the window
returns to the former JOB CONTENT window.
6-2
6 Convenient Functions
6.1 One-touch Operation "Direct Open"
Explanation
Direct
is
open
199 of 493
RE-CSO-A031