Label Search - YASKAWA NX100 Operator's Manual

149235-1CD


Label Search

This function searches for the desired label and the instruction using that label.
Operation
1 Select {EDIT}, {SEARCH} and
"LABEL SEARCH."
2 Input desired label name.
3 Press [ENTER].
4 Use the cursor to continue
searching.
The input buffer line appears.
For information on character input operation, refer to section 1.2.6
"Character Input"
At this time, search can be conducted by entering any one
character of the label. For example, to search for the "START"
label, enter only "S," and the search can be done.
The label is searched out and the cursor is on its line number.
JOB EDIT DISPLAY
JOB CONTENT
JOB NAME : TEST01
CONTROL GROUP : R1
0099 *START
0100 MOVJ VJ=100.00
0101 TIMER T=1.00
0102 MOVL V=138
0103 MOVL V=138
0104 MOVJ VJ=50.00
0105 MOVJ VJ=100.00
0106 DOUT OT#(1) ON
*START
Main Menu Short Cut
It is possible to continue searching by pressing the cursor key.
To end searching, select {EDIT}  {END SEARCH} on the menu
and press [SELECT].
JOB EDIT DISPLAY
JOB CONTENT
TOP LINE
JOB NAMETEST01
CONTROL GROUPR1
END LINE
0099 *START
0100 MOVJ VJ=100.00
END SEARCH
0101 TIMER T=1.00
0102 MOVL V=138
ENABLE SPEED TAG
0103 MOVL V=138
0104 MOVJ VJ=50.00
ENABLE POS LVL TAG
0105 MOVJ VJ=100.00
0106 DOUT OT#(1) ON
Main Menu Short Cut
3-85
3.9 Other Job-editing Functions
Explanation
UTILITY
STEP NO. : 0003
TOOL : 00
UTILITY
STEP NO. : 0003
TOOL : 00
RE-CSO-A031
3 Teaching
149 of 493