YASKAWA NX100 Operator's Manual page 237

149235-1CD
Copying Data
To input the same data as those set previously, perform the following operation.
Operation
1 Move the cursor to the line to
be copied.
2 Select {EDIT} under the menu. The pull-down menu appears.
3 Select {LINE COPY} under the
pull-down menu.
4 Move the cursor to the line
where the item is to be copied.
5 Select {EDIT} under the menu.
6 Select {LINE PASTE}.
DATA EDIT DISPLAY
PAM
LINE CLEAR
JOB
TEST
STATUS
LINE COPY
INPUT COORD
STEP X(mm) Y(mm) Z(mm)
LINE PASTE
007 10.00 0.00 0.00
008 10.00 0.00 5.00
009 0.00 5.00 0.00
010 0.00 0.00 0.00
011 0.00 0.00 0.00
012 0.00 0.00 0.00
013 0.00 0.00 0.00
014 0.00 0.00 0.00
015 0.00 0.00 0.00
016 0.00 0.00 0.00
COMPLETE CANCEL
Main Menu ShortCut
The desired data is copied to the line. However, if the line where
the data is to be copied does not have a speed value or PL value,
it cannot be copied.
6-40
6 Convenient Functions
6.4 PAM Function
Explanation
UTILITY
R1
Rx(deg) Ry(deg) Rz(deg) V(%) PL
0.00 0.00 0.00 0.00
-
0.00 0.00 0.00 0.00 -
0.00 0.00 0.00 0.00 -
0.00 0.00 0.00 0.00 -
0.00 0.00 0.00 0.00 -
0.00 0.00 0.00 0.00 -
0.00 0.00 0.00 0.00 -
0.00 0.00 0.00 0.00 -
0.00 0.00 0.00 0.00 -
0.00 0.00 0.00 0.00 -
237 of 493
RE-CSO-A031