Output - YASKAWA NX100 Operator's Manual

9 Arc Welding Application
9.12 Power Source Condition File
WIRE ANTI-STICKING (0 to 9.9 seconds)
Specifies the duration of the wire anti-stick process at the end of welding.
ARC FAILURE STOP (0 to 2.55 seconds)
Specifies the time between the detection of arc failure and the stopping of the manipulator
movement.
 POWER SOURCE CONDITION Window for Current/Voltage Output
RANGE
Indicates the polarity of the reference value for the welding current and voltage. If the range
is positive (+), the reference value is in the range between 0 and 14.00V. If the range is
negative (-), the reference value is in the range between 0 and -14.00V.
ADJUST (0.80 to 1.20)
A correction value to adjust the welding current/voltage output.
REF. (V) (0 to 14.00V)
Welding current/voltage reference values.
MEASURE (0 to 999A, 0 to 50.0V, or 50 to 150%)
The welding current/voltage output values measured at the reference values as given under
.
DATA EDIT
DISPLAY
POWER SOURCE CONDITION
POWER SOURCE NO.: 1/1
<CURRENT OUTPUT CHAR.> <WELDING VOLTAGE OUTPUT CHAR.>

RANGE: +

ADJUST: 1.00
NO. REF.(V) MEASURE (A) REF.(V) MEASURE (%)
01 0.00 30

02 1.35 62
03 2.70 94
04 10.80 286
05 12.15 318
06 13.50 350
07 0.00 0
08 0.00 0
Main Menu ShortCut
9-89
UTILITY
+
1.00

0.00 50
7.20 99
7.50 100
7.80 101
14.00 150
0.00 0
0.00 0
0.00 0
!Turn on servo power
149235-1CD
432 of 493
RE-CSO-A031