Enabling Reserved Start - YASKAWA NX100 Operator's Manual

149235-1CD


Enabling Reserved Start

The start button on the station is operative when the reserved start function is enabled, and the
following start operations are disabled.
• [START] on the programming pendant
• Start operation from external input signal (system input)
The OPERATING CONDITION window is shown only when the security mode is
NOTE
management mode
Operation
1 Select {SETUP} under the
main menu.
2 Select {OPERATE COND}.
3 Select "RESERVED START."
When reserved start is enabled, the external start and the programming pendant start are
NOTE
prohibited even if setting is "PERMIT."
Regardless of the operation cycle selected, it is automatically set to 1 CYCLE.
The OPERATING CONDITION window appears. The screen is
scrolled up/down by the cursor key when it locates at the top/
bottom of the items.
DATA EDIT DISPLAY
OPERATING CONDITION
EXTERNAL START
EXTERNAL MODE SWITCH
EXTERNAL CYCLE SWITCH
PP CYCLE SWITCH
EXTERNAL SERVO ON
CHECK/MACHINE LOCK
MASTER CALLING UP
MASTER JOB CHANGE
RESERVED START
RESERVED START JOB CHANGE
Main Menu Short Cut
Each time [SELECT] is pressed, "PERMIT" and "PROHIBIT"
alternate. Select "PERMIT."
DATA EDIT DISPLAY
OPERATING CONDITION
EXTERNAL START
EXTERNAL MODE SWITCH
EXTERNAL CYCLE SWITCH
PP CYCLE SWITCH
EXTERNAL SERVO ON
CHECK/MACHINE LOCK
MASTER CALLING UP
MASTER JOB CHANGE
RESERVED START
RESERVED START JOB CHANGE
Main Menu Short Cut
4-23
4.5 Playback with Reserved Start
Explanation
UTILITY
PERMIT
PERMIT
PERMIT
PERMIT
PERMIT
PERMIT
PERMIT
PERMIT
PROHIBIT
PERMIT
UTILITY
PERMIT
PERMIT
PERMIT
PERMIT
PERMIT
PERMIT
PERMIT
PERMIT
PERMIT
PERMIT
RE-CSO-A031
4 Playback
175 of 493