Deleting Jobs - YASKAWA NX100 Operator's Manual

5 Editing Jobs

5.2 Deleting Jobs

5.2
Deleting Jobs
This operation is used to delete jobs that are registered on the NX100. It can be performed in either the
JOB CONTENT window or the JOB LIST window.
5.2.1
Deleting Jobs on the JOB CONTENT Window
On the JOB CONTENT window, the current edit job is deleted.
Operation
1 Select {JOB} under the main
menu.
2 Select {JOB}.
3 Select {JOB} from the menu.
4 Select {DELETE JOB} under
the pull-down menu.
The JOB CONTENT window appears.
The pull-down menu appears.
JOB
EDIT
SELECT JOB
: JOB-A
CALL MASTER JOB
CONTROL GROUP: R1
CREATE NEW JOB
0000 NOP
0001 SET B000 0
RENAME JOB
0002 SET B001 1
COPY JOB
0003 MOVJ VJ=80.00
0004 MOVJ VJ=80.00
DELETE JOB
0005 DOUT OGH#(13) B002
The confirmation dialog box appears.
When "YES" is selected, the edit job is deleted. When deletion is
completed, the JOB LIST window appears.
When "NO" is selected, the job deletion is cancelled.
EDIT
JOB
JOB CONTENT
JOB NAME: JOB-A
CONTROL GROUP: R1
0000 NOP
0001 SET B000 0
0002 SET B001 1
0003 MOVJ VJ=80.00
0004 MOVJ VJ=80.00
0005 DOUT OGH#(13) B002
0006 WAIT IF IN#(5)=ON
0007 MOVL V=880.0
0008 MOVL V=880.0
0009 MOVL V=880.0
0010 DOUT OGH#(14) B003
0011 DOUT OT#(5) ON
0012 DOUT OT#(6) ON
Main Menu ShortCut
5-6
Explanation
DISPLAY UTILITY
STEP NO: 0003
TOOL: 00
DISPLAY UTILITY
STEP NO: 0003
TOOL: 00
Delete?
YES NO
149235-1CD
190 of 493
RE-CSO-A031