Arc Auxiliary Condition File - YASKAWA NX100 Operator's Manual

149235-1CD
9.5.5

Arc Auxiliary Condition File

An arc auxiliary condition file has the following three parts:
• Arc Retry Function Setting
• Arc Restart Function Setting
• Automatic Wire Anti-stick Function Setting
 Arc Retry Function Setting
NO. (0 to 9 times)
Maximum repetition count for the arc retry process.
RETRACT TIME (0 to 2.50 seconds)
Wire retracting time in the arc retry process.
REPLAY DISTANCE (0 to 99.9 mm)
Manipulator moving distance for an arc retry process at the replay mode.
SPEED (1 to 600 cm/min)
Speed of the manipulator when it returns to the welding start point at arc retry.
CURRENT (1 to 999A)
Welding current output when the manipulator returns to the welding start point at arc retry.
VOLTAGE (0 to 50.0V, 50 to 150%)
Welding voltage output when the manipulator returns to the welding start point at arc retry.
DATA EDIT DISPLAY
ARC AUXILIARY COND
COND NO.: 1
<RETRY FUNCTION SET>
 NO.
 RETRACT TIME

REPLAY DISTANCE
 SPEED
 CURRENT

VOLTAGE
Main Menu ShortCut
9-48
9 Arc Welding Application
9.5 Welding Condition Files
UTILITY
: 1 times
: 1.50 sec
: 10.0 mm
: 30 cm/min
: 100 A
: 100 %
! Turn on servo power
391 of 493
RE-CSO-A031