Setting Welding End Conditions - YASKAWA NX100 Operator's Manual

149235-1CD


Setting Welding End Conditions

The ARCOF instruction can be registered in any of the following four ways:
• With additional items to specify conditions
ARCOF AC=160 AVP=70 T=0.50 ANTSTK
• With an arc end condition file
ARCOF AEF#(1)
In this case, the welding condition is set using the arc end condition file. (Refer to section
9.5 "Welding Condition Files".")
• Without additional items
ARCOF
When the crater process is performed by changing the welding condition when welding is
completed, before the ARCOF instruction is executed, the welding condition needs to be
set using the welding condition setting instruction. (Refer to section 9.4.3 "ARCSET").
With Additional Items to Specify Conditions
Operation
1 Select the ARCOF instruction
in the instruction area.
2 Press [SELECT].
The ARCOF instruction appears in the input buffer line.
JOB EDIT
JOB CONTENT
JOB NAME: WORK A
CONTROL GROUP: R1
0000 NOP
0001 MOVJ VJ=80.00
0002 MOVL V=800
0003 ARCON
0004 MOVL V=50
0005 MOVL V=50
0006 MOVL V=50
0007 END
ARCOF
Main Menu ShortCut
The DETAIL EDIT window appears.
DATA EDIT
DETAIL EDIT
ARCOF
SET METHOD
ARCOF
Main Menu ShortCut
9-22
9 Arc Welding Application
9.4 Registering Arc Welding Instructions
Explanation
DISPLAY UTILITY
STEP NO: 0003
TOOL: 00
! Turn on servo power
DISPLAY UTILITY
: UNUSED
! Turn on servo power
365 of 493
RE-CSO-A031