Editing The Arc End Condition File - YASKAWA NX100 Operator's Manual

149235-1CD


Editing the Arc End Condition File

Editing COMMENT
Operation
1 Select "COMM."
2 Input characters.
Editing ANTI-STICK
Operation
1 Select "ANTI-STICK."
Editing Other Items
Operation
1 Select an item to be edited.
2 Input the number using the
Numeric keys.
9.5.9
Welding Speed Specifications
The welding speed is determined by one of the following:
• Welding speed specified by play speed of the move instruction
• Welding speed specified by the ARCON instruction or arc start condition file
When the move instruction does not specify a speed
Welding is performed at the ARCON instruction or arc start condition file speed.
When the move instruction and ARCON instruction specify different speeds
Priority is given to one according to the parameter values described below. To switch the priorities,
change the parameter setting.
Parameter
AxP005
x: Application number
Each time [SELECT] is pressed, the indication alternates
between "ON" and "OFF."
Contents
Move instruction speed is priority
ARCON instruction speed is priority : 1
9-58
9 Arc Welding Application
9.5 Welding Condition Files
Explanation
Explanation
Explanation
Initial Value
: 0 0
RE-CSO-A031
401 of 493