YASKAWA NX100 Operator's Manual page 8

Description of the Operation Procedure
Descriptions of the programming pendant keys, buttons, and displays are shown as follows:
Equipment
Programming
Pendant
Description of the Operation Procedure
In the explanation of the operation procedure, the expression "Select • • • " means that the cursor is
moved to the object item and the SELECT key is pressed, or that the item is directly selected by
touching the screen.
Registered Trademark
In this manual, names of companies, corporations, or products are trademarks, registered trademarks,
or brand names for each company or corporation. The indications of (R) and TM are omitted.
Character Keys The keys which have characters printed on them are
denoted with [ ].
ex. [ENTER]
Symbol Keys The keys which have a symbol printed on them are
not denoted with [ ] but depicted with a small picture.
ex. page key
The cursor key is an exception, and a picture is not
shown.
Axis Keys "Axis Keys" and "Numeric Keys" are generic names
Numeric Keys for the keys for axis operation and number input.
Keys pressed When two keys are to be pressed simultaneously,
simultaneously the keys are shown with a "+" sign between them,
ex. [SHIFT]+[COORD]
Displays The menu displayed in the programming pendant is
denoted with { }.
ex. {JOB}
Manual Designation
GO BACK
PAGE
viii
149235-1CD
8 of 493
RE-CSO-A031