Modifying Job Names - YASKAWA NX100 Operator's Manual

5 Editing Jobs

5.3 Modifying Job Names

5.3
Modifying Job Names
This operation is used to modify the name of a job that is registered. The operation can be performed
in either the JOB CONTENT window or the JOB LIST window.
5.3.1
Modifying Job Names on the JOB CONTENT Window
Operation
1 Select {JOB} under the main
menu.
2 Select {JOB}.
3 Select {JOB} from the menu.
4 Select {RENAME JOB} under
the pull-down menu.
The JOB CONTENT window appears.
JOB EDIT
JOB CONTENT
JOB NAME: JOB-A
CONTROL GROUP: R1
0000 NOP
0001 SET B000 0
0002 SET B001 1
0003 MOVJ VJ=80.00
0004 MOVJ VJ=80.00
0005 DOUT OGH#(13) B002
The pull-down menu appears.
JOB
EDIT
SELECT JOB
JOB NAME: JOB-A
CALL MASTER JOB
CONTROL GROUP: R1
CREATE NEW JOB
0000 NOP
0001 SET B000 0
RENAME JOB
0002 SET B001 1
COPY JOB
0003 MOVJ VJ=80.00
0004 MOVJ VJ=80.00
5-8
Explanation
UTILITY
DISPLAY
STEP NO: 0003
TOOL: 00
DISPLAY UTILITY
STEP NO: 0003
TOOL: 00
149235-1CD
192 of 493
RE-CSO-A031