Enabling The Modification Of Position Data Only - YASKAWA NX100 Operator's Manual

Hide thumbs Also See for NX100:

Table of Contents

Enabling the Modification of Position Data Only

It is possible to set conditions to allow changes of position data only, in jobs which are locked.

Select {SETUP} under the

Select {TEACHING COND}.

Select "STEP ONLY

Press [SELECT].

5.6 Enabling the Modification of Position Data Only

The TEACHING CONDITION window appears.

TEACHING CONDITION

RECT/CYLINDRICAL

LANGUAGE LEVEL

INSTRUCTION INPUT LEARNING

MOVE INSTRUCTION SET

STEP ONLY CHANGING

TEACHING CONDITION window is shown only

when the security mode is edit mode or

management mode.

Each time [SELECT] is pressed, the setting alternates between

"PROHIBIT" and "PERMIT."

5 Editing Jobs

Show Quick Links

Table of Contents