Copying Jobs - YASKAWA NX100 Operator's Manual

5 Editing Jobs

5.1 Copying Jobs

5.1
Copying Jobs
This operation is used to copy registered jobs and use them to create new jobs. It can be done using
either the JOB CONTENT window or the JOB LIST window.
5.1.1
Copying Jobs on the JOB CONTENT Window
On the JOB CONTENT window, the current edit job becomes the copy source job.
Operation
1 Select {JOB} under the main
menu.
2 Select {JOB}.
3 Select {JOB} under the menu. The pull-down menu appears.
4 Select {COPY JOB} under the
pull-down menu.
5 Input the new job name.
The JOB CONTENT window appears.
EDIT
DATA
JOB CONTENT
JOB NAME: TEST01
CONTROL GROUP: R1
0000 NOP
0001 SET B000 0
0002 SET B001 1
0003 MOVJ VJ=80.00
0004 MOVJ VJ=80.00
0005 DOUT OGH#(13) B002
JOB
EDIT
SELECT JOB
JOB NAME: JOB-A
MASTER JOB
CONTROL GROUP: R1
CREATE NEW JOB
0000 NOP
0001 SET B000 0
RENAME JOB
0002 SET B001 1
COPY JOB
0003 0OVJ VJ=80.00
0004 MOVJ VJ=80.00
0005 DOUT OGH#(13) B002
The name of the copy source job is displayed on the input area. It
is possible to partially change this name to enter a new name.
>
JOB-B
See section 1.2.6 "Character Input" for information
SUPPLE
on letter input operations.
-MENT
5-2
Explanation
DISPLAY UTILITY
STEP NO: 0003
TOOL: 00
UTILITY
DISPLAY
STEP NO: 0003
TOOL: 00
149235-1CD
186 of 493
RE-CSO-A031