Registering Reserved Start I/O Signal - YASKAWA NX100 Operator's Manual

4 Playback
4.5 Playback with Reserved Start


Registering Reserved Start I/O Signal

Register the start I/O signal as a preparation to perform start operation from the station.
This operation can be done only when the operation mode is teach mode and the security
NOTE
mode is management mode.
Operation
1 Select {SETUP} under the
main menu.
2 Select {RES. START(CNCT)}. The RESERVED START (CNCT) window appears.
3 Select "START IN" or "START
OUT" for each station.
4 Input signal number and press
[ENTER].
DATA EDIT DISPLAY
RESERVED START (CNCT)
NO. START IN START OUT
1
2
3
4
5
6
Main Menu Short Cut
The number can now be entered.
DATA EDIT DISPLAY
RESERVED START (CNCT)
NO. START IN START OUT
1
2
3
4
5
6
The input/output signal number is registered.
DATA EDIT DISPLAY
RESERVED START (CNCT)
NO. START IN START OUT
1
2
3
4
5
6
4-24
Explanation
UTILITY
UTILITY
UTILITY
149235-1CD
176 of 493
RE-CSO-A031