Selecting The Range - YASKAWA NX100 Operator's Manual

149235-1CD
3.7.1

Selecting the Range

After setting the range, Copy and Delete can be performed.
Operation
1 Move the cursor to the
instruction area in the JOB
CONTENT window.
2 Move the cursor to the start
line and press [SHIFT] +
[SELECT].
3 Move the cursor to the end
line.
JOB EDIT DISPLAY UTILITY
JOB CONTENT
JOB NAME :TEST01
CONTROL GROUP : R1
0000 NOP
0001 SET B000 0
0002 SET B001 1
0003 MOVJ VJ=80.00
0004 MOVJ VJ=80.00
0005 DOUT OGH#(13) B002
0006 DOUT OT#(41) ON
0007 MOVL C00002 V=880.0 CV#(1) CTP=0.662
0008 DOUT OT#(44) ON
0009 TIMER T=3.0
0010 MOVL V=880.0
0011 MOVL V=880.0
0012 MOVL V=880.0
Main Menu Short Cut
The range specification begins, and the address is displayed in
reverse.
JOB EDIT
JOB CONTENT
JOB NAME : TEST01
CONTROL GROUP : R1
0000 NOP
0001 SET B000 0
0002 SET B001 1
0003 MOVJ VJ=80.00
Start line
0004 MOVJ VJ=80.00
0005 DOUT OGH#(13) B002
End line
0006 DOUT OT#(41) ON
0007 MOVL C00002 V=880.0 CV#(1) CTP=0.662
0008 DOUT OT#(44) ON
0009 TIMER T=3.0
0010 MOVL V=880.0
0011 MOVL V=880.0
0012 MOVL V=880.0
Main Menu
Moving the cursor effects to the range. Up to the line specified by
the cursor is the range.
3-53
Explanation
STEP NO. : 0003
TOOL : 00
Turn on servo power
DISPLAY UTILITY
STEP NO. : 0003
TOOL : 00
Short Cut
Turn on servo power
3 Teaching
3.7 Editing Jobs
Move the cursor to
instruction area.
117 of 493
RE-CSO-A031