YASKAWA NX100 Operator's Manual page 257

149235-1CD
Initial Folder Setting
The folder that is contained in a deep hierarchy can be selected in a shortened operation.
When selecting {LOAD}, {SAVE}, {VERIFY}, or {DELETE} from the sub menu of {FD/PC CARD}, the
folder that has been set as an initial folder becomes a current folder.
Operation
1 Change the security to
management mode.
Select {FD/PC CARD} under
the main menu.
2 Select {FOLDER}.
3 Move the cursor to a folder
and press [SELECT].
4 Select {DISPLAY} --> {ROOT
FOLDER} under the pull-down
menu.
The FOLDER LIST window appears.
Select a folder that is to be set as a root folder.
The INITIAL FOLDER SETTING window appears.
EDIT DISPLAY
DATA
FOLDER LIST
ROOT FOLDER
TARGET FOLDER FOLDER 1
FOLDER NUM.
0003
[ . . ]
FOLDER 2
Main Menu ShortCut
A folder currently selected appears in "CURRENT FOLDER" and
the initial folder appears in "ROOT FOLDER."
DATA
EDIT DISPLAY
ROOT ENTRY
AUTO CHANGE
CURRENT FOLDER
C:/FOLDER 1 /FOLDER 2
ROOT FOLDER
C:/
Main Menu ShortCut
7-13
7 External Memory Devices
7.3 Operation Flow
Explanation
UTILITY
FOLDER 3
UTILITY
OFF
257 of 493
RE-CSO-A031