Searching - YASKAWA NX100 Operator's Manual

149235-1CD
3.9.6

Searching

When performing editing or confirmation, a search for the job or step can be done. The search can be
done when the cursor is in either the address or instruction area on the JOB CONTENT window.
Operation
1 Select {JOB} under the main
menu.
2 Select {JOB}.
3 Select {EDIT} under the menu. The pull-down menu appears.
4 Select {SEARCH}.
5 Select the searching type.
Searching is an operation by which the cursor is moved to a specific step or instruction in the edit job. A
target point can be instantaneously searched out without using the cursor.
The JOB CONTENT window appears.
JOB EDIT DISPLAY
JOB CONTENT
TOP LINE
JOB NAMETEST01
CONTROL GROUPR1
END LINE
0000 NOP
0001 'TEST
SEARCH
0002 MOVJ VJ=50.00
0003 MOVJ VJ=12.50
ENABEL SPEED TAG
0004 MOVL V=276
0005 TIMER T=1.00
ENABLE POS LVL TAG
0006 DOUT OT#(1) ON
MOVJ VJ=100.00
Main Menu Short Cut
The selection dialog box appears.
JOB EDIT DISPLAY
JOB CONTENT
JOB NAME : TEST01
CONTROL GROUP : R1
0000 NOP
0001 'This job is test job
0002 MOVJ VJ=50.00
0003 MOVJ VJ=12.50
0004 MOVL V=276
LINE SEARCH
0005 STEP SEARCH TIMER T=1.00
LABEL SEARCH
0006 DOUT OT#(1) ON
INSTRUCTION SEARCH
0007 MOVL V=138
Main Menu Short Cut
3-83
3.9 Other Job-editing Functions
Explanation
UTILITY
STEP NO. : 0003
TOOL : 00
UTILITY
STEP NO. : 0003
TOOL : 00
RE-CSO-A031
3 Teaching
147 of 493