Check Mode Operation - YASKAWA NX100 Operator's Manual

Hide thumbs Also See for NX100:

Table of Contents

4.2 Playback

Check Mode Operation

The machine runs without issuing work instructions, such as the ARCON instruction. It is used

primarily to check the path of the program.

Select "CHECK-RUN" under

the SPECIAL PLAY window.

Select "COMPLETE."

Weaving Prohibit Setting during Check Mode Operation

The weaving operation is not executed in the weaving section of the job.

Select "WEAV PROHIBIT IN

CHK-RUN" under the

SPECIAL PLAY window.

Select "COMPLETE."

Cancel All Special Operations

All special operations are disabled by the following operation

Select {EDIT} from the menu.

Select "CANCEL ALL

Special operations are also automatically cancelled if the main power is shut OFF.

The setting alternates between "VALID" and "INVALID."

The window returns to the PLAYBACK window.

The setting alternates between "VALID" and "INVALID."

The window returns to the PLAYBACK window.

The message "All special functions canceled" appears.

Show Quick Links

Table of Contents