Editing Instructions - YASKAWA NX100 Operator's Manual

149235-1CD
3.6

Editing Instructions

The content of editing differs depending on where the cursor is in the address area or instruction area.

When the cursor is in the address area
Instructions can be inserted, deleted, or modified.
When the cursor is in the instruction area
Date of additional items of already-registered instructions can be modified, inserted, or
deleted.
Editing additional items only is called "line editing."
When inserting or modifying instructions, input the instruction with the function keys such as [TIMER],
etc. or using the instruction list dialog box. The selected instruction is displayed on the input buffer line
with the same additional items as registered previously.
3.6.1
Instruction Group
The instructions are divided into eight groups by processing or each work.
By pressing [INFORM LIST]
JOB EDIT DISPLAY UTILITY
JOB CONTENT
JOB NAME :TEST01
CONTROL GROUP : R1
0000 NOP
0001 MOVJ VJ=25.00 PL=0 NWAIT ACC=20 DCC=20
0002 MOVJ VJ=25.00
0003 MOVJ VJ=12.50
0004 ARCON ASF#(1)
0005 END
MOVJ VJ=50
Short Cut
Main Menu
, the instruction group list dialog box appears.
INFORM
LIST
JOB EDIT DISPLAY UTILITY
JOB CONTENT
JOB NAME : TEST01
CONTROL GROUP : R1
0000 NOP
0001 MOVJ VJ=25.00 PL=0 NWAIT ACC=20 DCC=20
0002 MOVJ VJ=25.00
0003 MOVJ VJ=12.50
0004 ARCON ASF#(1)
0005 END
MOVJ VJ=50
Main Menu Short Cut
3-39
3.6 Editing Instructions
STEP NO. : 0003
TOOL : *

IN/OUT
STEP NO. : 0003
TOOL : 00
CONTROL
DEVICE
MOTION
ARITH
SHIFT
OTHER
SAME
PRIOR
3 Teaching
103 of 493
RE-CSO-A031