Arcset - YASKAWA NX100 Operator's Manual

149235-1CD
9.4.3

ARCSET

This is the instruction to set the welding conditions (current, voltage, etc.) individually.
The ARCSET instruction can be registered in any of the following two ways:
• With additional items to specify conditions
ARCSET AC=200 AVP=100
• With an arc start condition file
ARCSET ASF# (1)
In this case, the welding condition is set using the arc start condition file.
(Refer to section 9.5 "Welding Condition Files")
Registering the ARCSET Instruction

With Additional Items to Specify Conditions
Operation
1 Move the cursor to the
address area.
2 Press [INFORM LIST].
3 Select "DEVICE."
4 Select the ARCSET
instruction.
The instruction list dialog box appears.
ARCON
ARCOF
VWELD
AWELD
ARCSET
WVON
WVOF
ARCCTS
The ARCSET instruction appears in the input buffer line.
EDIT
JOB
JOB CONTENT1
JOB NAME: WORK A
CONTROL GROUP: R1
0000 NOP
0001 MOVJ VJ=80.00
0002 MOVL V=800
0003 ARCON
0004 MOVL V=50
0005 END
ARCSET AC=200 AVP=100
Main Menu ShortCut
9-30
9 Arc Welding Application
9.4 Registering Arc Welding Instructions
Explanation
IN/OUT
ARCCTE
CONTROL
DEVICE
MOTION
ARITH
SHIFT
OTHER
SAME
PRIOR
DISPLAY UTILITY
STEP NO: 0003
ARCON ARCCTE
TOOL: 00
ARCOF
VWELD
AWELD
ARCSET
WVON
WVOF
ARCCTS
! Turn on servo power
IN/OUT
CONTROL
DEVICE
MOTION
ARITH
SHIFT
OTHER
SAME
PRIOR
373 of 493
RE-CSO-A031