Setting Edit Lock On Individual Job Units - YASKAWA NX100 Operator's Manual

5 Editing Jobs

5.5 Setting Edit Lock on Individual Job Units

5.5
Setting Edit Lock on Individual Job Units
In order to prevent inadvertent changes in registered jobs or data, it is possible to apply an edit lock to
individual jobs. When a job is protected from editing, the job cannot be edited or deleted. Edit lock is
set and cancelled on the JOB HEADER window.
Operation
1 Select {JOB} under the main
menu.
2 Select {JOB}.
3 Select {DISPLAY} under the
pull-down menu.
4 Select {JOB HEADER}.
5 Select "EDIT LOCK" and set
the edit prohibit.
The JOB HEADER window appears.
DATA EDIT
JOB HEADER
JOB NAME: TEST01
COMM. : THIS JOB IS TEST JOB
: 2003/05/20 12:00
DATE
:
CAPACITY
:
LINES
:
STEPS
:
EDIT LOCK
Each time [SELECT] is pressed, the setting alternates between
"ON" (edit disabled) and "OFF" (edit enabled).
5-12
Explanation
DISPLAY UTILITY
1024 BYTES
30 LINES
20 STEPS
OFF
149235-1CD
196 of 493
RE-CSO-A031