YASKAWA NX100 Operator's Manual page 362

9 Arc Welding Application
9.4 Registering Arc Welding Instructions
Without Additional Items
When an additional item is not provided for the ARCON instruction, set the welding
NOTE
conditions in advance with the welding condition setting instruction (ARCSET) before
executing the ARCON instruction. (Refer to "section 9.4.3 "ARCSET".")
Operation
1 Select the ARCON instruction
in the instruction area.
2 Press [SELECT].
3 Select "ASF#( )" or "AC=."
4 Select "UNUSED."
5 Press [ENTER].
The ARCON instruction appears in the input buffer line.
JOB EDIT
JOB CONTENT
JOB NAME: WORK A
CONTROL GROUP: R1
0000 NOP
0001 MOVJ VJ=80.00
0002 MOVL V=800
0003 ARCON ASF#(10) T=0.30 RETRY REPLAY
0004 MOVL V=50
0005 MOVL V=50
0006 MOVL V=50
0007 ARCOF
0008 MOVL V=800
0009 MOVJ VJ=80.00
0010 END
ARCON ASF#(10) T=0.30 RETRY REPLAY
Main Menu ShortCut
The DETAIL EDIT window appears.
DETAIL EDIT
ARCON
SET METHOD
DETAIL EDIT
ARCON
WELDING CURR
WELDING VOLT
TIMER
The selection dialog box appears.
The set contents are displayed in the input buffer line.
ARCON
9-19
Explanation
DISPLAY UTILITY
STEP NO: 0003
TOOL: 00
! Turn on servo power
: ASF#() 1
: AC= 180
: AVP= 100
: T= 0.30
V 80
ASF#()
AC=
UNUSED
149235-1CD
362 of 493
RE-CSO-A031