YASKAWA NX100 Operator's Manual page 125

149235-1CD
Operation
9 Select "EXECUTE." The speed is changed according to the setting.
• If instructions that include specific speed data
NOTE
such as SPEED or ARCON instructions (including
speed data of the welding condition file) exist in
the specified section, the speed data for those
steps are not changed. Therefore, in such cases,
the set time and the actual time required are not
same.
• If the speed data is limited by the maximum value,
the following message is displayed.
!Limited to maximum speed
3-61
3.9 Other Job-editing Functions
Explanation
RE-CSO-A031
3 Teaching
125 of 493