S2C317 To S2C321: Time Reset - YASKAWA NX100 Operator's Manual

8 Parameter
8.3 Mode Operation Setting Parameters


S2C317 to S2C321: TIME RESET

These parameters specify whether resetting operation of the specified times is permitted or not.
S2C317 : CONTROL POWER ON TIME
S2C318 : SERVO POWER ON TIME
S2C319 : PLAYBACK TIME
S2C320 : WORK TIME
S2C321 : WEAVING TIME
0: Prohibit Resetting
1: Permit Resetting
"PERMIT" is set as the initial value for the work time and motion time.
 S2C333: TOOL NO. SWITCHING
This parameter specifies whether tool number switching is permitted or not. If "PERMIT" is selected, 24
types of tools from number 0 to 23 can be switched. If "NOT PERMIT" is selected, only number "0" can
be used.
0: Prohibited
1: Permitted
 S2C335: POSITION TEACHING BUZZER
This parameter specifies whether the buzzer sound at position teaching is used or not.
0: With buzzer
1: Without buzzer
8-23
149235-1CD
312 of 493
RE-CSO-A031