S2C211: Remote First Cycle Mode - YASKAWA NX100 Operator's Manual

8 Parameter
8.3 Mode Operation Setting Parameters


S2C211: REMOTE FIRST CYCLE MODE

This parameter sets the cycle that changes from the local mode to the remote mode.
The setting can be made on the OPERATING CONDITION window.
0: Step
1: 1 cycle
2: Continuous
3: Setting retained
 S2C212: LOCAL FIRST CYCLE MODE
This parameter sets the cycle that changes from the remote mode to the local mode.
The setting can be made on the OPERATING CONDITION window.
0: Step
1: 1 cycle
2: Continuous
3: Setting retained
S2C230: POWER ON FIRST CYCLE MODE

This parameter sets the first cycle mode for when the power is turned ON.
The setting can be made on the OPERATING CONDITION window.
0: Step
1: 1 cycle
2: Continuous
3: Setting retained
 S2C231: TEACH MODE FIRST CYCLE MODE
This parameter sets the cycle that changes from the play mode to the teach mode.
The setting can be made on the OPERATING CONDITION window.
0: Step
1: 1 cycle
2: Continuous
3: Setting retained
S2C232: PLAY MODE FIRST CYCLE MODE

This parameter sets the cycle that changes from the teach mode to the play mode.
The setting can be made on the OPERATING CONDITION window.
0: Step
1: 1 cycle
2: Continuous
3: Setting retained
8-19
149235-1CD
308 of 493
RE-CSO-A031