Editing Comments - YASKAWA NX100 Operator's Manual

149235-1CD
5.4

Editing Comments

Comments of up to 32 characters can be affixed to jobs to identify them more specifically. Comments
are displayed and edited on the JOB HEADER window.
Operation
1 Select {JOB} under the main
menu.
2 Select {JOB}.
3 Select {DISPLAY} under the
pull-down menu.
4 Select {JOB HEADER}.
5 Select "COMM."
6 Input comments.
7 Press [ENTER].
The JOB HEADER window appears.
EDIT
DATA
JOB HEADER
JOB NAME: TEST
:
COMM.
: 2003/05/20 12:00
DATE
:
CAPACITY
:
LINES
:
STEPS
:
EDIT LOCK
:
TO SAVE TO FD
:
GROUP SET
The window for character input appears.
For jobs that are already registered, comments are displayed on
the input area. It is possible to partially change comments to
enter new comments.
THIS JOB IS TEST JOB
See section 1.2.6 "Character Input" for information
SUPPLE
on character input operations.
-MENT
The input area comment is registered and is displayed in the
"COMM." area on the JOB HEADER window.
EDIT
DATA
JOB HEADER
JOB NAME: TEST
: THIS JOB IS TEST JOB
COMM.
: 2003/05/20 12:00
DATE
:
CAPACITY
:
LINES
:
STEPS
:
EDIT LOCK
:
TO SAVE TO FD
:
GROUP SET
5-11
5.4 Editing Comments
Explanation
DISPLAY UTILITY
1024 BYTES
30 LINES
20 STEPS
OFF
NOT DONE
R1
DISPLAY UTILITY
1024 BYTES
30 LINES
20 STEPS
OFF
NOT DONE
R1
5 Editing Jobs
195 of 493
RE-CSO-A031