Playback From Reserved Start - YASKAWA NX100 Operator's Manual

149235-1CD
4.5.2

Playback from Reserved Start

 Start Operation
Operation
1 Set the mode switch to "PLAY."
2 Press start button on the
station.
• While the job is being executed, the start button lamp on the station lamps.
NOTE
• If the workpiece must be prepared at the station, prepare it before pressing the start
button.
• If the start button of another station is pressed during execution of a job at one station, the
job on the station is reserved and prepares to start. Jobs are reserved and executed in
the order that the start buttons are pressed.
• When a job is reserved, the start button lamp on the station blinks.
• No station job is reserved when it is being executed even if its start button is pressed.
• To suspend a job being executed, perform the Hold operation.
Reservations are cancelled when the start button is pressed again during the job
SUPPLE
reservation operation.
-MENT
The job registered for the station starts up and the manipulator
performs one cycle operation.
4-27
4.5 Playback with Reserved Start
Explanation
RE-CSO-A031
4 Playback
179 of 493