Changing Welding Conditions During Playback - YASKAWA NX100 Operator's Manual

9 Arc Welding Application

9.6 Changing Welding Conditions During Playback

9.6
Changing Welding Conditions During Playback
Changing the welding conditions during playback is enabled only when the command
NOTE
condition is analog type.
9.6.1
Function Keys
While the ARC COND ADJUSTMENT window is displayed in the play mode, the welding current and
voltage can be changed using the function keys. The arc welding performance during playback
changes with the welding current and voltage. The changed data of the current and voltage values can
be reflected in the associated instructions or welding condition files.
When [CUR/VOL ] is pressed, the welding current and voltage increase.
3
When [CUR/VOL ] is pressed, the welding current and voltage decrease.
CUR/VOL
Each time the key is pressed, the current changes in increments of 1A, and the voltage
changes in increments of 1% or 0.1V.
-
CUR/VOL
9-59
149235-1CD
402 of 493
RE-CSO-A031