Table Of Instructions Classified By Function; Table 2.2 Operation Notation - Hitachi H8S/2215 Series Hardware Manual

2.6.1

Table of Instructions Classified by Function

Tables 2.3 to 2.10 summarizes the instructions in each functional category. The notation used in
tables 2.3 to 2.10 is defined below.
Table 2.2 Operation Notation
Symbol Description
Rd General register (destination)*
Rs General register (source) *
Rn General register*
ERn General register (32-bit register)
(EAd) Destination operand
(EAs) Source operand
EXR Extended control register
CCR Condition-code register
N N (negative) flag in CCR
Z Z (zero) flag in CCR
V V (overflow) flag in CCR
C C (carry) flag in CCR
PC Program counter
SP Stack pointer
#IMM Immediate data
disp Displacement
+ Addition
– Subtraction
×
Multiplication
÷
Division
∧
Logical AND
∨
Logical OR
⊕
Logical exclusive OR
→
Move
∼
NOT (logical complement)
:8/:16/:24/:32 8-, 16-, 24-, or 32-bit length
Note: * General registers include 8-bit registers (R0H to R7H, R0L to R7L), 16-bit registers (R0 to
R7, E0 to E7), and 32-bit registers (ER0 to ER7).
Rev. 3.0, 10/02, page 36 of 686