Table of Contents
Advertisement
Bit Bit Name Initial Value R/W
3
DTF3
0
2
DTF2
0
1
DTF1
0
0
DTF0
0
The same factor can be selected for more than one channel. In this case, activation starts with the
highest-priority channel according to the relative channel priorities. For relative channel priorities,
see section 7.4.10, DMAC Multi-Channel Operation.
Description
R/W
Data Transfer Factor:
R/W
These bits select the data transfer factor (activation source).
R/W
0000: –
R/W
0001: Activated by A/D conversion end interrupt
0010: –
0011: –
0100: Activated by SCI channel 0 transmission complete
interrupt
0101: Activated by SCI channel 0 reception complete
interrupt
0110: Activated by SCI channel 1 transmission complete
interrupt
0111: Activated by SCI channel 1 reception complete
interrupt
1000: Activated by TPU channel 0 compare match/input
capture A interrupt
1001: Activated by TPU channel 1 compare match/input
capture A interrupt
1010: Activated by TPU channel 2 compare match/input
capture A interrupt
1011: –
1100: –
1101: –
1110: –
1111: –
Rev. 3.0, 10/02, page 149 of 686
Advertisement
Table of Contents
