Table Of Instructions Classified By Function; Table 2.2 Operation Notation - Hitachi H8S/2628 Hardware Manual

2.6.1

Table of Instructions Classified by Function

Tables 2.3 to 2.10 summarize the instructions in each functional category. The notation used in
tables 2.3 to 2.10 is defined below.
Table 2.2 Operation Notation
Symbol
Rd
Rs
Rn
ERn
MAC
(EAd)
(EAs)
EXR
CCR
N
Z
V
C
PC
SP
#IMM
disp
+
–
×
÷
∧
∨
⊕
→
∼
:8/:16/:24/:32
Note:* General registers include 8-bit registers (R0H to R7H, R0L to R7L), 16-bit registers (R0 to
R7, E0 to E7), and 32-bit registers (ER0 to ER7).
Rev. 1.0, 09/02, page 26 of 568
Description
General register (destination)*
General register (source)*
General register*
General register (32-bit register)
Multiply-accumulate register (32-bit register)
Destination operand
Source operand
Extended control register
Condition-code register
N (negative) flag in CCR
Z (zero) flag in CCR
V (overflow) flag in CCR
C (carry) flag in CCR
Program counter
Stack pointer
Immediate data
Displacement
Addition
Subtraction
Multiplication
Division
Logical AND
Logical OR
Logical XOR
Move
NOT (logical complement)
8-, 16-, 24-, or 32-bit length