Hitachi H8S/2215 Series Hardware Manual page 73

Type Symbol
D/A converter DA1
DA0
A/D converter AVCC
D/A converter
AVSS
Vref
Boundary TMS
scan
TCK
TD0
TDI
TRST
USB USD+
USD-
VBUS
USPND
VM
VP
RCV
VPO
FSE0
OE
SUSPND
Pin No.
TFP-120 BP-112
44 J6
45 L6
51 L8
43 K5
50 J7
108 A5
107 D6
106 B6
110 C5
109 B5
58 K9
59 L10
55 K8
53 H7
35 K3
36 L3
37 J4
38 K4
40 H5
42 L5
33 H4
I/O Function
Output Analog output pins for the D/A
converter.
Input Power supply pin for the A/D and D/A
converter. When the D/A converter is
not used, connect this pin to the
system power supply(VCC).
Input The ground pin for the A/D and D/A
converter. Connect this pin to the
system power supply (0 V).
Input The reference voltage input pin for
the A/D and D/A converter. When the
A/D and D/A converter is not used,
this pin should be connected to the
system power supply (VCC).
Input Control signal input pin for the
boundary scan
Input Clock input pin for the boundary scan
Output Data output pin for the boundary scan
Input Data input pin for the boundary scan
Input Reset pin for the TAP controller
I/O USB data input/output pin
Input Connection/disconnection detecting
Input/output pin for the USB cable
Output USB suspend output
This pin is driven high when a
transition is made to suspend state.
Input Pins to be connected to the
transceiver (PDIUSBP11A)
manufactured by Philips Electronics.
Output
Rev. 3.0, 10/02, page 15 of 686