Removing The Stapler (J0St41678); Removing The Cover (J0St41671); Rep 16.3.9 Booklet Stapler Move Motor - Xerox WorkCentre 5222 Service Manual

6. Remove the Stapler. (Figure 4)
a. Release the wires from the Clip.
b. Disconnect the Connector.
c. Remove the Screws (3).
d. Remove the Stapler.
Stapler
Screws
Figure 4 Removing the Stapler (j0st41678)
Replacement
1. Reverse the removal procedure for replacement.
Repairs and Adjustments
REP 16.3.8, REP 16.3.9

REP 16.3.9 Booklet Stapler Move Motor

Parts List on PL 23.18
Removal
To avoid personal injury or shock, do not perform repair or adjustment with electrical
power applied to the machine.
1. Remove the Booklet Maker Assembly from the Finisher.
2. Remove the Cover for the Booklet Stapler Move Motor.
a. Remove the Screw (1).
b. Remove the Cover.
Clip
Connector
February, 2008
4-170
WARNING
(REP
(Figure
Cover
Figure 1 Removing the Cover (j0st41671)
16.3.2)
1)
Screw
Launch Version
WorkCentre 5225, 5230