Rep 13.38 Booklet Stapler Move Motor - Xerox VersaLink B7025 Service Manual

5. Remove the stapler, Figure 4:
a. Release the harness from the clamp (1).
b. Disconnect the connector (2).
c. Remove three screws (3).
d. Remove the stapler (4).
Figure 4 Stapler removal
Replacement
1. The replacement is the reverse of the removal procedure.
2. Perform ADJ 13.2 Booklet Folding and Stapling Position.
Repairs and Adjustments
REP 13.37, REP 13.38

REP 13.38 Booklet Stapler Move Motor

Parts List on PL 13.55
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the booklet maker assembly,
2. Remove the cover for the booklet stapler move motor,
a. Remove the screw (1).
b. Remove the cover (2).
April 2017
4-132 Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
GP 10. Disconnect the power cord
REP 13.31.
Figure 1:
Figure 1 Cover removal
Launch Issue