Rep 12.16 Finisher Pwb - Xerox DocuColor 2240 Service Manual

REP 12.16 Finisher PWB

Parts List on PL 17.13
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
PWBs can be damaged by electrostatic discharge. Observe all ESD procedures.
1. Remove Rear Cover (PL 17.5).
2. Remove the PWB Cover (Figure 1).
Figure 1 Removing PWB Cover
3. Remove and retain the ROM from the Finisher PWB
NOTE: The ROM and the Finisher PWB are spared separately. When replacing the Fin-
isher PWB you will need to install the old ROM on the new PWB.
4. Disconnect Connectors (Figure 2).
Initial issue
DC 3535/2240/1632, WC M24
WARNING
CAUTION
1
Remove
Screws
(10)
2
Remove
PWB
Cover
(PL 17.13).
1
Disconnect
Connectors
(10)
Figure 2 Disconnecting Connectors
09/03
4-133
2
Remove Wire
Harness from
Guides (4)
Repairs and Adjustments
REP 12.16