Table of Contents
Advertisement
4.7.9.a. IEEE 802.1X Port Based Access Control
Configuration
On the 802.1X Access Control Configuration Menu screen, pressing "p"
opens the Port Based Access control Configuration Menu as shown in Fig.
4-7-44. On this screen, you can configure the IEEE 802.1X port based access
control.
The supported authentication methods are EAP-MD5, TLS, and PEAP.
PN23129K/PN23129A Local Management System
Advanced Switch Configuration -> Port Based Access Control Configuration Menu
NAS ID: Nas1
Port Status : Authorized
Operational Control Direction
Administrative Control Direction: Both
Per Port Re-auth
Current PVID
Guest Access Mode : Both
Transmit Period
Supplicant Timeout : 30
Serv Timeout
Guest VLAN ID
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
Pre[v]ious Page
[P]ort No
Port Auth [M]ode
Port [C]ontrol
Port Ctrl [D]irection
Num[b]er of Supplicant
De[f]ault VLAN ID
Command>
Enter the character in square brackets to select option
Fig. 4-7-44 IEEE 802.1X Port Based Access Control Configuration
Screen Description
NAS ID
Displays the access ID (NAS Identifier).
Port No
Displays the port number.
Port Control
Displays the operation mode for authentication requests.
Auto
Force
Unauthorized
Force Authorized
Port Status
Displays the authentication status. reflecting the Port Control setting
shown below.
Unauthorized
Authorized
Port No: 1
Port Control : Force Authorized
Authorized MAC Address: --:--:--:--:--:--
: Both
: Disabled
: 1
Dynamic VLAN
: 30
seconds
Max Request
seconds
Quiet Period
: 30
seconds
Re-auth Period
: ----
Default VLAN ID
[T]ransmission Period
Q[u]iet Period
Ma[x]imum Request
Server Time[o]ut
Supp[l]icant Timeout
Gue[s]t Access Mode
[G]uest VLAN ID
D[y]namic VLAN Status
The access control function is enabled. The
authentication process relay is performed
between the client and authentication server.
The access control function is disabled. All
authentication requests from clients are ignored.
The access control function is disabled. The port is
made accessible without authentication. (Factory
default setting)
Indicates that the ID is not authorized.
Indicates that the ID is authorized.
159
: Disabled
: 2
: 60
seconds
: 3600 seconds
: ----
R[e]-auth Period
Re-[a]uth Status
Initiali[z]e
[R]e-auth Initialize
Delete Aut[h] MAC
Force Auth MAC T[i]meout
[Q]uit to previous menu
Advertisement
Table of Contents
