Table of Contents
Advertisement
4.6.7.
Port Based Access Control Configuration Menu
On the Advanced Switch Configuration Menu, pressing "X" opens the 802.1X
Access Control Configuration screen as shown in Fig. 4-55. On this screen, you can
configure the IEEE 802.1X access control.
The supported authentication methods are EAP-MD5, TLS, and PEAP.
PN28248 Local Management System
Advanced Switch Configuration -> Port Based Access Control Configuration Menu
NAS ID
Port No
Port Status
Port Control
Transmission Period
Supplicant Timeout
Server Timeout
Maximum Request
Quiet Period
Re-authentication Period
Re-authentication Status
Re-authentication Timer Mode
-------------------------------- <COMMAND> -----------------------------------
[P]ort No
Port [C]ontrol
[T]ransmission Period
Supp[l]icant Timeout
Server Time[o]ut
[M]aximum Request
[K]ind of Re-auth Timer Mode
Command>
Enter the character in square brackets to select option
Fig. 4-55 IEEE802.1X Access Control Configuration
Note:
When IEEE802.1X port-based authentication is activated, MAC Learning can-
not be disabled.
: Nas1
: 1
: Authorized
: Force Authorized
: 30
seconds
: 30
seconds
: 30
seconds
: 2
: 60
seconds
: 3600 seconds
: Disabled
: RADIUS
Q[u]iet Period
R[e]-auth Period
Re-[a]uth Status
[I]nitialize
[R]e-auth Initialize
[Q]uit to previous menu
121
Advertisement
Table of Contents
