Table of Contents
Advertisement
4.3.8.d.
Display of MAC Address Table by VLAN
On the Forwarding Database Information Menu, press "V." The command prompt
changes to "Enter VLAN ID>." Specifying a port number opens the Display MAC
Address by VLAN ID screen as shown in Fig. 4-9. On this screen, you can display the
MAC address table by VLAN.
PN25249 Local Management System
Forwarding Database Menu -> Display MAC Address by VLAN ID
Age-Out Time: 300 Sec.
MAC Address
-----------------
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
Set [A]ge-Out Time
Command>
Enter the character in square brackets to select option
Screen Description
Age-Out Time:
Displays the time to store the MAC address table. It is equal to the time after
receiving the last packet. The factory default setting is 300 seconds (5 minutes).
Select VLAN ID:
Displays the selected VLAN ID.
MAC Address
Displays all the entries in the MAC address table.
Port
Displays the port to which the MAC address has been assigned.
Available commands are listed below.
N
Display the next page.
Press "N" to display the next page.
P
Display the previous page.
Press "P" to display the previous page.
A
Set the time to store the MAC address.
Press "A." The command prompt changes to "Enter Age-Out time>." Enter the age-out time
with a value of 10 to 1000000 (seconds).
S
Switching Hub the VLAN to be displayed.
Press "S." The command prompt changes to "Enter VLAN ID>." Enter a VLAN ID you wish to
display.
Q
Return to the parent menu.
Port
----
Fig. 4-9 Display of MAC Address Table by VLAN
Selected VLAN ID:1
[S]elect VLAN ID
[Q]uit to previous menu
59
Advertisement
Table of Contents
