3.2.3.
VLAN Port Config
Select "Advanced Config" and "VLAN" and then "VLAN Port Config" to open the
screen shown in Figure 3-27. On this screen, you can configure the specified VLAN
port settings.
Screen Description
Target Port
Select multiple target ports for configuring settings at a time.
Selecting
Click the "Select All" button, and all ports will be selected.
Click the "Reset" button, and all ports will be deselected.
Click the "Set selected port (s) " button after selecting and changing the items for
configuring settings at a time, and the same settings will apply to the selected
ports.
Port Number
Displays the port number.
PVID
Displays the port's current PVID (Port VLAN ID) . The PVID displays the VLAN ID
to which an untagged frame should be transferred when it was received. The fac-
tory default setting is 1. If a tagged frame is received, the tag is referenced
regardless of this value to determine the destination port.
Receiving Frame
Displays the type of frames to be received. For all ports, "Admit All" is the factory
default setting.
Admit All
Tagged Only
Figure 3-27 VLAN Port Config
All frames are received.
Only tagged frames are received.
50