Table of Contents
Advertisement
4.6.8.e
Displaying MAC address table by VLAN
On the Forwarding Database Information Menu, press "V." The command
prompt changes to "Enter VLAN ID>." Specifying a port number opens the
Display MAC Address by VLAN ID screen as shown in Fig. 4-6-21. In this
screen, you can display MAC Address table by VLAN.
PN23129K/PN23129A Local Management System
Forwarding Database Menu -> Display MAC Address by VLAN ID
Age-Out Time: 300 Sec.
MAC Address
-----------------
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
Set [A]ge-Out Time
Command>
Enter the character in square brackets to select option
Fig. 4-6-21 Displaying MAC address table by VLAN
Screen Description
Age-Out Time:
Displays a time to store MAC address table. It is equal to the time after
receiving the last packet. The factory default setting is 300 seconds (5
minutes).
Select VLAN
Displays the selected VLAN ID.
ID:
MAC Address
Displays a MAC address in MAC address table.
Port
Displays a port to which the MAC address has belonged.
Available commands are listed below.
N
Display the next page.
Press "N" to display the next port.
P
Display the previous page.
Press "P" to display the previous port.
A
Set a time to store MAC address.
Press "A." The command prompt changes to "Enter Age-Out time>." Enter Age-Out
time with a value of 10 to 1000000 by seconds.
S
Switch VLAN to be displayed.
Selected VLAN ID:1
Port
----
[S]elect VLAN ID
[Q]uit to previous menu
71
Advertisement
Table of Contents
