Voice Vlan; Voice Vlan Global - Panasonic GA-ML Series Manual

5.2.8

Voice VLAN

5.2.8.1

Voice VLAN Global

Use the following window to implement the settings on a global voice
VLAN. Enable or disable to set a voice VLAN function to global, and then
specify the voice VLAN of a switch. The number of voice VLANS to specify
for the switch is one, only.
Choose L2 Features > VLAN > Voice VLAN > Voice VLAN Global to
display the following window.
In the section of the Voice VLAN Global, you can configure the following
parameters.
Parameter
Voice VLAN State
Voice VLAN ID
Voice VLAN CoS
Aging-Time
5.2.8 Voice VLAN 5.2.8.1 Voice VLAN Global
Figure 5-27 Voice VLAN Global
This parameter enables or disables to set the voice
VLAN function to global.
Enter a VLAN ID for the voice VLAN. Before the settings,
the VLAN specified as the voice VLAN must exist
beforehand, and the range is from 2 to 4,094.
Enter CoS of the voice VLAN. The range is from 0 to 7.
The voice packets arriving at the voice VLAN
corresponding-ports are marked as the CoS specified.
You can distinguish between voice VLAN traffics and
data traffics of QoS (Quality of Service) by including
annotations for CoS packets.
Enter the aging-time. This parameter configures the aging-time
and voice VLAN information to age out the voice device, which
automatically learned. If the last voice device, which is
connected to a port, stops transmitting traffics and a MAC
address of the voice device ages out from FDB, the aging-timer
of the voice VLAN activates. If the deadline of the voice VLAN
aging-timer expires, ports are removed from the voice VLAN. If
the voice traffics restart during the aging-time, the aging-timer
is canceled. The range is from 1 to 65,535 (minutes). The port
becomes removed from the voice VLAN after the expiration of
the voice VLAN aging-timer.
5 L2 Features
Overview
107