Other Settings; Setting The Lcd Backlight; Setting Editor Enable; Setting The Protocol - Panasonic AV-HS400AE Operating Instructions Manual

5. System settings

5-6. Other settings

5-6-1. Setting the LCD backlight

The LCD backlight can be set to ON or OFF.
1 Press the [FUNC] button to light its indicator, and press the [SYSTEM] button to display the SYSTEM menu.
2 Turn [F1] to display the System sub menu.
3 Turn [F3], and select On or Off for the backlight using the LCD-BL item.
<Menu display>
System BusMode LCD-BL
2/16 PGM/PST
A/B

5-6-2. Setting editor enable

The user can set whether to enable control from an external device (editor) connected to the RS-4 connector.
On the System sub menu, turn [F4] to set On or Off for control from the external device (editor) connected to
the RS-4 connector using the EditEN item.
On: Control is enabled.
Off: Control is disabled.
EditEN item On and Off can be assigned to one of the user buttons.  See -3-1.

5-6-3. Setting the protocol

Set the RS-4 protocol.
On the System sub menu, turn [F] to set the protocol using the Protcol item.
GVG-A: The GVG protocol is complied with.
The wipe pattern number starts from 0.  See 6-1.
GVG-B: The GVG protocol is complied with.
The wipe pattern number starts from 1.  See 6-1.
P/TCont: The controller for the camera or controller for the pan-tilt head is controlled.
This setting is selected when the unit is connected to a controller and a multiple number of
cameras or pan-tilt heads are to be controlled.
P/TDirt: This setting is selected when the unit is connected directly to a pan-tilt head, and a camera or
pan-tilt head is to be controlled.
 If "P/TCont" or "P/TDirt" is selected as the Protcol item setting, "—" is displayed for the EditEN item.
At this time, the user buttons will not work.
EditEN Protcol
On On GVG-A
Off Off GVG-B
P/TCont
P/TDirt
90