Enable Clipaging - Panasonic ZEQUO 6400 Operating Instructions Manual

 Restrictions
Only Administrator and Operator-level users can issue this command.
 Example
To configure the baud rate:
Zxxx0:admin# config serial_port baud_rate 9600
Command: config serial_port baud_rate 9600
Success.
Zxxx0:admin#

5.14. enable clipaging

 Description
This command is used to enable pausing of the screen display when show command
output reaches the end of the page. The default setting is enabled.
 Format
enable clipaging
 Parameters
None.
 Restrictions
Only Administrator and Operator-level users can issue this command.
 Example
Only Administrator and Operator-level users can issue this command.
Zxxx0:admin#enable clipaging
Command: enable clipaging
Success.
Zxxx0:admin#
5. Basic Management Commands
43