Op. 35 724 16
PEDAL REMOVAL
With Boom and Bucket Hand Controls
1. Remove the step shield hardware and step
shield.
2. Remove the bolts, 1, washers, lock washers, and
nuts, that connect the control rods, 2, to the pedal
hub arms.
3. Disconnect the control valve links, 1, from the
control valve spools by removing the cotter pins,
2, and clevis pins, 3.
4. Disconnect the control valve links, 1, from the
control hub arms by removing the bolts, 4, wash-
ers, lockwashers, and nuts.
5. Remove the right pedal mounting bolts, 1, and re-
move the right pedal, 2.
6. Remove the left pedal mounting bolts, 3, and re-
move the left pedal, 4.
SECTION 35 - HYDRAULIC SYSTEM
19997768
19996833
19996832
35-81
2
1
3
2
1
4
3
4
Copyright © New Holland
140
1
141
1
2
142