New Holland LS140 Workshop Manual page 528

Op. 10 223 10
REPLACEMENT OF FUEL SHUTOFF
SOLENOID
1. Support the boom on the boom lock pins.
2. Open the rear door and remove the left engine
side shield.
3. Remove the power wire from the solenoid, 1.
4. Remove the solenoid, 2, from the injection pump.
5. Solenoid pull-in amperage: 1.5 - 1.8 amps.
Solenoid hold-in amperage: 1.3 - 1.7 amps.
6. Reinstall the solenoid and tighten securely.
Reinstall the power wire.
SECTION 55 - ELECTRICAL SYSTEM
55-103
Copyright © New Holland
130