Engine Disassembly Sequence - New Holland LS140 Workshop Manual

ENGINE DISASSEMBLY SEQUENCE

Op. 55 301 10
ALTERNATOR
Disconnect the alternator wire harness and wires, 1.
Remove the alternator pivot and adjusting bracket,
hardware, 2.
Op. 10 414 20
REMOVE COOLING FAN AND PULLEY
Remove the fan retaining hardware and spacers.
The engine fan is equipped with covers, 1, over the
center of the fan, both front and rear.
Op. 10 218 18
FUEL INJECTION PIPE
1. Loosen the fuel pipe nuts from the fuel injection
pump and injectors, 1. Remove the pipes as an
assembly.
2. Remove the spring clamp and fuel return hose,
2.
Op. 10 218 30
INJECTOR ASSEMBLY
Loosen and remove the securing nuts, 3. Remove
the leak-off rail, 4. Remove the aluminum washers
and discard. Remove the injectors, tagging or
marking with the cylinder they were removed from.
SECTION 10 - ENGINE
10-25
Copyright © New Holland
21
22
23