New Holland LS140 Workshop Manual page 448

FUNCTIONAL GROUP 3
The symbol in display group 3 is:
1. Fuel gauge.
The fuel gauge, 1, is a vertical 10-segment green
LED bar graph. When the fuel level reaches three
bars, 2, the segments will flash accompanied by
an audible alarm for about 5 seconds.
When the fuel level reaches two bars, the EIC will
signal the operator again with the segments
flashing and another 5-second audible alarm.
NOTE: The lower fuel gauge segments accurately
read the lower fuel levels so an operator is less likely
to run out of fuel. However, if a machine is operated
on a hillside, the fuel gauge should be monitored
closely to avoid running out of fuel, as the fuel can still
move freely from one end of the tank to the other.
SECTION 55 - ELECTRICAL SYSTEM
1
55-23
2
Copyright © New Holland
13